From: Erick B. (erickbe@xxxxxxxxx)
Date: Tue Aug 13 2002 - 22:07:42 GMT-3
You need a password on the line vty 5 config. This is
required for VTY access as far as I know.
--- Kyaw Khine <kkhine@register.com> wrote:
> #1
> When I use "transport input ssh" .. I'm getting
> "Password required, but none
> set" error message.
> I'd like to disable or change this error message.
>
> #2
> I want to be able to telnet to a particular vty
> port. I understand vty 5
> will not be used until vty0-4 are being used. I'm
> looking for a TCP port
> number to which I can telnet directly so that I will
> go into vty5 right
> away.
>
> Thanks ..
>
> -----Original Message-----
> From: Desimone, Aurelio [mailto:ADesimone@refco.com]
> Sent: Tuesday, August 13, 2002 8:08 PM
> To: Kyaw Khine; 'ccielab@groupstudy.com'
> Subject: RE: Telnet questions
>
>
> #1
> use the 'transport input ssh' under the line
>
> #2
> I'm not clear on what you are asking here. If you
> want different ways
> to authenticate on different lines you can do that
> by
>
> username cisco pass cisco
>
> line vty 0 4
> pass xxx
> line vty 5
> login local
>
> But you won't get to line 5 until lines 0-4 are in
> use.
>
>
> -----Original Message-----
> From: Kyaw Khine [mailto:kkhine@register.com]
> Sent: Tuesday, August 13, 2002 5:48 PM
> To: 'ccielab@groupstudy.com'
> Subject: Telnet questions
>
>
> Hi Group,
>
> Could someone help me out with my problems at work?
>
> #1.
> I want to turn on SSH and turn off telnet
> completely.
> Is there any way I can turn off or change default
> error message "Password
> required, but none set"?
>
> #2.
> Is there any way I can specify which VTY to telnet
> from outside?
> Lets say I want VTY 5 for "user cisco" and "password
> cisco" and I want that
> only for VTY 5. And it is not for reverse telnet.
>
> Thanks ..
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:24 GMT-3