RE: dialer watch and ospf

From: ccie candidate (ccie1@xxxxxxxxx)
Date: Tue Aug 13 2002 - 13:46:57 GMT-3

• Next message: Todd Haynes: "FW: Email"
• Previous message: ccie candidate: "RE: FRTS"
• Maybe in reply to: Luis Miguel Gil: "dialer watch and ospf"
• Next in thread: CCIE FUN: "RE: dialer watch and ospf"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
 guys ;
i dont know from where you got that dialer watch is not supporting ospf ????

check the link

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/dialts_
c/dtsprt6/dcdbakdw.htm

btw , demand circuit and dialer watches are completely two separate issues ..i
have an old post explaining the difference

--
On Tue, 13 Aug 2002 15:51:15
 Raj wrote:
>-----Original Message-----
>From: Raj [mailto:raj.bahad@totalise.co.uk]
>Sent: 13 August 2002 15:36
>To: Luis Miguel Gil
>Subject: RE: dialer watch and ospf
>
>
>Because OSPF has "ip ospf demand circuit" to provide a similar function.
>Generally, I ahve found this option to be more widely used than
>dialer-watch.
>
>Raj.
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Luis Miguel Gil
>Sent: 13 August 2002 15:29
>To: ccielab@groupstudy.com
>Subject: dialer watch and ospf
>
>
>hi all,
>I've read in the doc CD that dialer watch is not supported over OSPF. (12.1)
>can anybody explain why OSPF and not, i.e. EIGRP ? is there any trick to
>make it run, appart from static routes ?
>Thanks in advance,
>Luis Miguel.

• Next message: Todd Haynes: "FW: Email"
• Previous message: ccie candidate: "RE: FRTS"
• Maybe in reply to: Luis Miguel Gil: "dialer watch and ospf"
• Next in thread: CCIE FUN: "RE: dialer watch and ospf"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:24 GMT-3