From: Mingzhou Nie (mnie@xxxxxxxxx)
Date: Fri Aug 09 2002 - 13:57:20 GMT-3
following is one of my lab notes for dlsw.
- encapsulation: watch out direct encap and llc2(dlsw lite) encap. both
reference individual dlci, but the first one needs "pass-thru" option
at the end and map dlci to dlsw, vs. the latter one doesn't use
"pass-thru" and map dlci to llc2. direct encap only works on main
interface. and direct encap doesn't work with backup peer. you can not
configure ip address in "dlsw local-peer" statement.
http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/tech/dls3_rg.htm
http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2007.htm#xtocid31
http://www.groupstudy.com/archives/ccielab/200201/msg00583.html
http://www.groupstudy.com/archives/ccielab/200111/msg00784.html
http://www.groupstudy.com/archives/ccielab/200201/msg00945.html
--- "Zhang, Ou (David)" <OuDavid.Zhang@gs.com> wrote:
> There're two ways to configure DLSW over Frame Relay.
>
> Method #1
> dlsw remote-peer 0 frame-relay interface serial 0 100 pass-thru
> interface Serial0
> frame-relay map dlsw 100
>
> Method #2
> dlsw remote-peer 0 frame-relay interface serial 1/0 601
> interface ser 1/0
> frame-relay map llc2 601 broadcast
>
> I could easily get the method #2 to work, but just had no luck with
> method
> #1. Please advise. Thanks.
>
> -David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:21 GMT-3