From: Dean Whitley (dean.whitley@xxxxxxxxxxx)
Date: Fri Aug 09 2002 - 13:10:58 GMT-3
I found this excerpt in the DLSW+ Design guide.
"Direct encapsulation provides neither reliable delivery of frames nor local
acknowledgment. All keepalive frames flow end-to-end. Direct encapsulation
is supported only when the end systems reside on Token Ring. Direct
encapsulation does not provide any rerouting."
Otherwise it looks correct.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Zhang, Ou (David)
Sent: Friday, August 09, 2002 10:56 AM
To: 'ccielab@groupstudy.com'
Subject: DLSW over Frame Relay
There're two ways to configure DLSW over Frame Relay.
Method #1
dlsw remote-peer 0 frame-relay interface serial 0 100 pass-thru
interface Serial0
frame-relay map dlsw 100
Method #2
dlsw remote-peer 0 frame-relay interface serial 1/0 601
interface ser 1/0
frame-relay map llc2 601 broadcast
I could easily get the method #2 to work, but just had no luck with method
#1. Please advise. Thanks.
-David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:21 GMT-3