From: ccie candidate (ccie1@xxxxxxxxx)
Date: Fri Aug 09 2002 - 12:52:14 GMT-3
most probably you didnt get it work because you kept the other side promsicuous
...it wont work .
you have to define the other side peer to be pass-thru to get it work .
i have been to the same problem and when i configured it pass-thru it worked fi
ne .
let me know if this helped.
--On Fri, 9 Aug 2002 10:56:24 Zhang, Ou (David) wrote: >There're two ways to configure DLSW over Frame Relay. > >Method #1 >dlsw remote-peer 0 frame-relay interface serial 0 100 pass-thru >interface Serial0 >frame-relay map dlsw 100 > >Method #2 >dlsw remote-peer 0 frame-relay interface serial 1/0 601 >interface ser 1/0 > frame-relay map llc2 601 broadcast > >I could easily get the method #2 to work, but just had no luck with method >#1. Please advise. Thanks. > >-David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:21 GMT-3