From: Erick B. (erickbe@xxxxxxxxx)
Date: Tue Aug 06 2002 - 23:42:19 GMT-3
Rick,
I haven't used a 3550 or 2950 yet, but I did read over
this briefly a week ago on cisco.com. From my brief
skimming of the docs it sounds like there are multiple
files on the flash the system runs off of. I believe
it was a main firmware image and some data files. The
archive command essentially TFTPs a TARball down I
believe and automatically extracts/explodes the
archive into the multiple files.
I may be wrong on this, but thats what I recall.
--- Rick Lowery <ccie_2003@hotmail.com> wrote:
> There is lot I still must learn about using the
> orginal archive command, which
> is how Cisco says to upgrade the code. What happend
> to the copy tftp flash?
> The commands are still on the box, but they don't
> work, and when you go to the
> CCO pages they only show using the archive command..
> If anyone firgures out
> the file system please share it.. The group will
> benefit...
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3