From: Jim Brown (Jim.Brown@xxxxxxxxxxxxx)
Date: Tue Aug 06 2002 - 15:15:09 GMT-3
You are entering the network address for the network as the address for the
interface.
Try 128.100.1.1 instead of 128.100.1.0 and see what happens
128.100.1.0 = network
128.100.1.255 = broadcast
Everything else in-between is usable.
-----Original Message-----
From: Ted McDermott [mailto:tedmcdermott@yahoo.com]
Sent: Tuesday, August 06, 2002 11:58 AM
To: ccielab@groupstudy.com
Subject: Bad Mask Message
Why would I get the following error message?
r2(config)#int lo10
r2(config-if)#ip addr 128.100.1.0 255.255.255.0
Bad mask /24 for address 128.100.1.0
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:17 GMT-3