From: Krucker, Louis (louis.krucker@xxxxxxxxxxx)
Date: Tue Aug 06 2002 - 14:46:57 GMT-3
Hi folks
I play around with a simple multicast lab and run in some troubles
|-R2-------------R1---------------R4--|
R2 is the multicast source, R1 is the mapping agent and R4 is connected
to multicast receivers. I use sparse-dense mode on all interfaces, R2 is the
RP.
My idea was to simulate two multicast groups on R2 which i can ping from
R4 to test it.
On R2 i use ip igmp join-group 240.0.0.1
ip igmp join-group 241.0.0.2
and on the ethernet "ip pim send-rp-announce Loopback0 scope 10"
to announce the rp to the cloud.
On R1 i have configure ip pim send-rp-discovery lo 0 scope 10 to
set up a mapping agent. On R4 i configured only multicast-routing and
sparse-dense mode on the interfaces which route multicast.
The problem I can ping those groups from the MA but not from R4, does
somebody know where is the mistake ? IP routing is OK because i can ping
from R4 the ethernet interface where thos two sourced are connected.
Thanks for help
Louis
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:17 GMT-3