From: Jaspreet Bhatia (jasbhati@xxxxxxxxx)
Date: Tue Aug 06 2002 - 13:06:10 GMT-3
Hello David,
I will take a shot at this
9.2 This is an IRDP question
2.2 This has to do with VLAN 30 having higher priority than VLAN 50 . so
set spantree portvlanpriority ( please confirm this )
11.1 This has to do with user privilege levels and this is level 15 . If
you use the command
username unnamed password cisco
line vty 0 4
login local
privilege level 15
Hope this helps
Jaspreet
At 10:35 AM 8/6/2002 -0400, Zhang, Ou (David) wrote:
>Hello,
>
>I'm totally stuck with the following questions from the CCIE Practical
>Studies vol. 1. I'd appreciate any answers, hints or suggestions. Thanks.
>
>p. 1167
>9.2 Configure R3 so that workstations in Vlan 30 can dynamically locate
>their default gateway. They are not using DHCP. (R3 hosts Vlan 30.)
>
>p. 1175
>2.2 Configure the Catalyst so that if the backplane of the switch gets
>overloaded, the ports in VLAN 30 get serviced before those in VLAN 50. (The
>switch hosts these two vlans in question.)
>
>
>p. 1177
>11.1 Configure R1 so that when the user unnamed logs into the router,
>that user immediately is put in enable mode.
>
>-David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:17 GMT-3