From: P729 (p729@xxxxxxx)
Date: Sun Aug 04 2002 - 23:25:43 GMT-3
Perhaps you can try a combination of 'modem dialin' and 'autocommand' line
commands and a null modem cable to see if you can get the port to
automatically telnet to the other end when you plug in and raise the
modem-control signals.
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "Tim Ross" <ross2k@pclv.com>
To: "GroupStudy LAB" <ccielab@groupstudy.com>
Sent: Saturday, August 03, 2002 8:39 AM
Subject: OT:Termserver-to-Termserver config help
I am trying to setup two two termserver at remote locations. I need them
setup
so that if I plug one async-232 cable in port 1 that it will communication
out
the remote termserver's port 1on the other side. The devices are IBM RS/6000
and another server-type device that hosts a backup database. I have already
checked the archives and the Cisco web site but can't find a clear
port-to-port configuration for remote termservers. It needs to appear that
the
remote device is local. Configs/commands/solutions appreciated.
Tim
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:16 GMT-3