From: ying c (bf5tgh1@xxxxxxxxx)
Date: Fri Aug 02 2002 - 19:31:42 GMT-3
Hi,
My gut feeling is reason 6 in
http://www.cisco.com/warp/public/104/26.html
You may also want to read
http://www.cisco.com/warp/public/104/10.html
for more detail info.
Use 'show ip ospf database route' or 'show ip ospf
database external' to see why the router reject those
routes will also help.
HTH.
Chang
--- "Krake, Kris" <KKrake@aegonusa.com> wrote:
> I have a curious situation...
>
> TOPO:
> ---FRAME---RB
> | |
> other---RA--- -| ethernet
> routers | |
> ----FRAME--RC
>
>
> All routers in OSPF process 1
> RA has a frame multipoint interface with PVCs to
> both RB and RC.
> RB and RC are connected via ethernet segment
>
> The frame cloud joining RA,RB,and RC is area 0
> The ethernet between RB and RC is in area 1
>
> Router A is attached to 2 other routers from which
> it is receiving routes.
>
> The issue is this:
> Router B is not installing the routes it learns from
> Router A in the route
> table although the exist in the OSPF database. The
> OSPF database shows LSAs
> for all the routes from BOTH RA and RC. I have FULL
> ospf adjacencies with
> both RA and RC. If I shut the frame PVC between RA
> and RB then the routes
> learned from RC will go into the route table as
> expected. If I bring the
> interface back up the routes are removed.
>
> The frame network is set up with network type
> non-broadcast with configured
> neighbors. RA is set to highest priority and both
> RB and RC show RA as the
> DR.
>
> Am I having a brain meltdown or is this unusual.
> I've never seen OSPF
> routes in the database that refused to show up in
> the route table. I've
> seen that with BGP...haven't we all....but not with
> OSPF.
>
> KK
>
>
>
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Kris A. Krake
> AIT Network Engineering and Consulting
> 502.560.2716
> kkrake@aegonusa.com
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:15 GMT-3