From: Krake, Kris (KKrake@xxxxxxxxxxxx)
Date: Thu Aug 01 2002 - 13:48:29 GMT-3
Standard T1 cable...
Pin 1 ---- Pin4
Pin 2 ---- Pin5
-----------------
R1
Int s0/0
ip address 10.1.1.1 255.255.255.0
service-module t1 timeslots all speed 64
service-module t1 linecode b8zs
service-module t1 framing esf
R2
Int s0/0
ip address 10.1.1.2 255.255.255.0
service-module t1 timeslots all speed 64
service-module t1 linecode b8zs
service-module t1 framing esf
The thing of note is that you DO NOT need a clock statement on either
router.
KK
-----Original Message-----
From: Jeremy Junginger [mailto:jjunginger@interactcommerce.com]
Sent: Thursday, August 01, 2002 12:02 PM
To: ccielab@groupstudy.com
Subject: T1 crossover from WIC to WIC
Quick Question:
Anyone have a config snippet of 2 routers connected WIC to WIC via T1
Crossover cable? I have been searching the archives for a link (no pun
intended..heheh..). Any information, links, posts would be greatly
appreciated:
|---Fa0/0(Router1)WIC--T1-Crossover---WIC(Router2)Fa0/0---|
Jeremiah A. Junginger
[GroupStudy.com removed an attachment of type application/x-pkcs7-signature
which had a name of smime.p7s]
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:13 GMT-3