Re: ospf over nbma again

From: Prakash H Somani (pdsccie@xxxxxxxxxxxxxx)
Date: Wed Jul 31 2002 - 12:43:43 GMT-3

• Next message: chenyan: "maybe a bug"
• Previous message: chenyan: "multipoint problem"
• Maybe in reply to: chenyan: "ospf over nbma again"
• Next in thread: Bruce Williams: "RE: ospf over nbma again"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi,

Have you seen "IP ospf neighbour" command ??? I am sure u will see
it must be stuck in Attempt Mode.

Read these two Links:

http://www.cisco.com/warp/public/104/13.html

http://www.cisco.com/warp/public/104/29.html

You will have to configure Neighbour command on PTM interface to
make the communication through.

REgards...Prakash

On Wed, 31 Jul 2002 chenyan wrote :
>hi,guys,
>
>My question is when the network types are non-brocdcast all on
>both hub and spokes where the hub with multipoint subinterfaces
>and the spoke with the phycial interface,and the ip ospf network
>is unavailable.
>
>I can see in the out of the command "sh ip ospf interface s1"
>that all the interfaces are non-broadcast, but why not adj?
>
>Thanks

• Next message: chenyan: "maybe a bug"
• Previous message: chenyan: "multipoint problem"
• Maybe in reply to: chenyan: "ospf over nbma again"
• Next in thread: Bruce Williams: "RE: ospf over nbma again"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:50 GMT-3