multipoint problem

From: chenyan (chenyan@xxxxxxxxxxxxxx)
Date: Wed Jul 31 2002 - 12:42:33 GMT-3

• Next message: Prakash H Somani: "Re: ospf over nbma again"
• Previous message: Neil Moore: "Re[2]: Tracking Reverse Telnets"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hi,guys,

appreciate your help.
But I still have a problem.
when I use the ip ospf network point-to-multipoint statement on the hub router
it can work, but at this time the hub is point-to-multipoint type and the spoke
s are non-broadcast type. As I configure previously that both hubs and spokes a
re non-broadcast type but it does not work, WHY?

Thanks

• Next message: Prakash H Somani: "Re: ospf over nbma again"
• Previous message: Neil Moore: "Re[2]: Tracking Reverse Telnets"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:50 GMT-3