From: Volkov, Dmitry (Toronto - BCE) (dmitry_volkov@xxxxxxxxx)
Date: Wed Jul 31 2002 - 12:23:59 GMT-3
I can not use delay because 1st route is IPX EIGRP route, there is no RIP
running on S0/0
There is RIP running on BRI in the book.
So I have to compare RIP and EIGRP - where hop count comes into play...
I've tried to run EIGRP on BRI but again hop count vie BRI is less than via
s0/0....
Dmitry
-----Original Message-----
From: Chris Hugo [mailto:chrishugo@yahoo.com]
Sent: Wednesday, July 31, 2002 11:11 AM
To: Volkov, Dmitry (Toronto - BCE); 'Prakash H Somani'
Cc: 'ccielab@groupstudy.com'
Subject: RE: external hop count in IPX EIGRP/RIP
Hi,
Why don't you try modifying delay. This is the primary factor for IPX RIP.
Let us know how it goes.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/atip
x_r/ipx/2rdipx2.htm#xtocid8
<http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ati
px_r/ipx/2rdipx2.htm#xtocid8>
thanks,
chris hugo
"Volkov, Dmitry (Toronto - BCE)" <dmitry_volkov@ca.ml.com> wrote:
Prakash,
I didn't find offset-list command for IPX ????
Dmitry
-----Original Message-----
From: Prakash H Somani [mailto:pdsccie@rediffmail.com]
Sent: Wednesday, July 31, 2002 10:24 AM
To: Volkov,Dmitry(Toronto - BCE)
Cc: 'ccielab@groupstudy.com'
Subject: Re: external hop count in IPX EIGRP/RIP
Hi,
You can use "Offset-list" command to modify hope count. But I am
not sure how far it will be suitable for your scenario...
regards....Prakash
On Mon, 29 Jul 2002 Volkov, Dmitry (Toronto - BCE) wrote :
>Hello group,
>
>If there is any way to manipulate external hop count in IPX EIGRP
>or RIP ?
>
>Something like offset-list for IP RIP ?
>
>For example, I have routes:
>
>1) 1st route exists under normal conditions
>E 7 [292864000/3] via 8.0002.0002.0002, age >00:00:08, 1u,
>Se0/0
>
>2) 2nd one is appeared when se0/0 goes down and backup via ISDN
>goes up
>
>E 7 [2561152000/1] via 14.0006.0006.0006, age
>00:01:48, 603u,
>BRI0/0
>
>When serial link is restored - 2nd route still exists (and first
>one doesn't
>come in), because
>route 2) is preferable as its external hop count equals "1" as
>opposite to
>"3" (route 1).
>
>Is it possible to make route 1) prefered over 2) ?
>Change(ignore) hop count via bri0/0 ?
>
>I know that "backup interface" would work fine...
>
>Does anybody know what "ipx algorithms" command means ?
>
>I got this situation in "Desktop protocols case study"
>M.Satterlee&S.Hutnik
>CCIE Lab practice kit.
>
>Thanks,
>
>Dmitry
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:50 GMT-3