From: syv (syv@xxxxxxxxxxxxxxx)
Date: Wed Jul 31 2002 - 12:16:41 GMT-3
On Wednesday, July 31, 2002, chenyan wrote:
c> My question is when the network types are non-brocdcast
c> all on both hub and spokes where the hub with multipoint
c> subinterfaces and the spoke with the phycial
c> interface,and the ip ospf network is unavailable.
c> I can see in the out of the command "sh ip ospf interface
c> s1" that all the interfaces are non-broadcast, but why
c> not adj?
If you are using non-broadcast then you should use neighbors
under the router ospf statement
Thanks
---- syv@911networks.com
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:50 GMT-3