From: Mingzhou Nie (mnie@xxxxxxxxx)
Date: Wed Jul 31 2002 - 11:50:46 GMT-3
do you use inverse arp or map dlci statically? if you statically map
dlci with ip, remember to put "broadcast" keyword at the end.
frame-relay map ip 1.1.1.1 100 broadcast
http://www.cisco.com/warp/public/104/22.html#4
--- chenyan <chenyan@deeptht.com.cn> wrote:
> hi,guys,
>
> My question is when the network types are non-brocdcast all on both
> hub and spokes where the hub with multipoint subinterfaces and the
> spoke with the phycial interface,and the ip ospf network is
> unavailable.
>
> I can see in the out of the command "sh ip ospf interface s1" that
> all the interfaces are non-broadcast, but why not adj?
>
> Thanks
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:50 GMT-3