From: Graham, John (john.graham@xxxxxxxx)
Date: Mon Jul 29 2002 - 06:15:31 GMT-3
Frame-relay map ?
-----Original Message-----
From: Omer Ansari [mailto:omer@ansari.com]
Sent: 28 July 2002 18:41
To: ccielab@groupstudy.com
Subject: is local policy routing only way to ping the other spoke?
All,
-----(s0)R3
|
R2-(p2mp)
|
-----(s0)R1
FrameRelay partial mesh:
R2 is a hub, R1 and R3 are spokes.
R2 has a multipoint interface while R1 and R3 are physical interfaces.
R1 R2 and R3 need to be in the same network:
e.g. 10.1.1/24
R2: 10.1.1.2, R1: 10.1.1.1 , R3: 10.1.1.3
problem i'm running into is this: there is a requirement to be able to
ping "all" interfaces of "all" routers.
The only way I know how i can get R1's s0 to ping R3's s0 is to use local
policy map on both of them, by matching the other's IP address and setting
the next hop to 10.1.1.2 (R2; spoke)
this works, but is there any other way to ping the other spoke w/o local
policy?
thanks in advance.
Omer
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:48 GMT-3