From: Joe (GroupStudy@xxxxxxxxxxx)
Date: Fri Jul 26 2002 - 13:35:55 GMT-3
The default metric for OSPF is 20, that's why. If you specify a metric,
you'll avoid this.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sam Dagoski
Sent: Thursday, July 25, 2002 8:54 PM
To: ccielab@groupstudy.com
Subject: Redistributing connected in OSPF
When I redistribute a connected 10 mb ethernet
interface (ospf cost of 10) into ospf using the
command "redistribute connected" a funny thing
happens.
The route is entered as an External Type 2 which is
fine because that is the default. But the metric is
20, not what I would expect of 10?
It seems as if redistribute connected doubles the
connected interfaces metric when redistributing into
OSPF.
Why?
---------------------------------------------------------
Sam Dagoski
Priciple Engineer
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:45 GMT-3