From: Tim Medley (tim.medley@xxxxxxxxxxxxxxx)
Date: Fri Jul 26 2002 - 11:01:03 GMT-3
At Networkers last month, during the CCIE Power Session, they discussed this is
sue. Basically what cisco told us is that the different lab locations use diffe
rent terminal aplication (hyperterm, securecrt, etc.) and that the programs in
use were subject to change at any time. They reccomended against getting to com
fortable with one application vs. another, and specifically reccommended not to
try and write scripts in the terminal application; they have seen this blow up
in a candidates face quite often.
Pretty much all of the terminal applications function the same, so I wouldn't w
orry to much about this.
Also the Prctors that gave the Power Session, said that the PC's candidates use
in the lab will have shortcuts on the desktop for each router/switch in the po
d already setup.
Tim
Tim Medley, CCNP+Voice, CCDP, CWNA
Sr. Network Architect
VoIP Group
iReadyWorld
-----Original Message-----
From: Chuck Church [mailto:cchurch@MAGNACOM.com]
Sent: Thursday, July 25, 2002 4:20 PM
To: 'Kleberg, Jason'; 'Michael Snyder'; 'Shaun Wakelen'
Cc: 'ccielab@groupstudy.com'
Subject: RE: Practice with Reflection or Hyperterm???
RTP was using SecureCRT back in Feb. Don't know if anything's changed. It
probably shouldn't make much difference what you use. I had never used the
SecureCRT before, but it didn't bother me at all during the lab. The
routers did though :)
Chuck Church
CCIE #8776, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Kleberg, Jason
Sent: Thursday, July 25, 2002 3:17 PM
To: 'Michael Snyder'; 'Shaun Wakelen'
Cc: ccielab@groupstudy.com
Subject: RE: Practice with Reflection or Hyperterm???
i heard hyperterm or securecrt,,
j
-----Original Message-----
From: Michael Snyder [mailto:msnyder@ldd.net]
Sent: Thursday, July 25, 2002 2:06 PM
To: 'Shaun Wakelen'
Cc: ccielab@groupstudy.com
Subject: Practice with Reflection or Hyperterm???
I'm a bit slow at times.
Is the terminal program now used in the lab, Reflection?
Gee, I'm been using hyperterm forever because they used it in the lab.
So in review,
If I'm taking my lab in RTP next month, I should be using reflection to
practice?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Shaun Wakelen
Sent: Thursday, June 06, 2002 6:41 AM
To: eric ong
Cc: ccielab@groupstudy.com
Subject: RE: Break sequence for Reflection?
Eric
Set-up customised buttons on the toolbar to do the various break
sequences
you have listed. I just use CTRL-^^, CTRL-^x and CTRL-BREAK.
(Setup-Toolbar-Customize, then New Button and ensure you have checked
the
box 'insert special characters using the keyboard'). I also configured
these
on the lab. Takes a few minutes, but well worth it I feel.
Shaun Wakelen
#9007
-----Original Message-----
From: eric ong [mailto:ongyongk@yahoo.com]
Sent: 06 June 2002 12:17
To: ccielab@groupstudy.com
Subject: Break sequence for Reflection?
May I know the break sequence for the Reflection terminal app used in
the
CCIE lab?
Have tried Ctrl-Shift-6, Ctrl-C, Ctrl-Break, Ctrl-Alt-Break,
Ctrl-Shift-Break, etc...
Thanks.
eric
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:45 GMT-3