From: Ng, Kim Seng David (David) (ksng@xxxxxxxxx)
Date: Fri Jul 26 2002 - 10:53:07 GMT-3
Hi group,
Just needed someone's confirmation on my config in answering Fatkid's A
dvanced DLSW question 6 which goes:
"5. Configure R5 so that peer connections (to R4) are formed only if there is S
NA traffic destined for the ACCT_AS400 host. The peer connection should stay up
for at least 20 minutes"
My config:
R5:
dlsw local-peer peer-id 30.13.1.5
dlsw remote-peer 0 tcp 30.4.1.4 keepalive 0 lsap-output-list 200 host-netbios-o
u
t as400 timeout 90 dynamic inactivity 20
netbios access-list host as400 permit ACCT_AS400
access-list 200 permit 0x0000 0x0D0D
R4:
dlsw local-peer peer-id 30.4.1.4 promiscuous
Will the remote peer config in R5 ensure that both the lsap and netbios-name fi
lter be satisfied before peering occurs?
Fatkid uses another solution with "dlsw icanreach" at R4 instead for netbios-na
me and mac-address. On R5, the remote peering includes a dest-mac command.
Thanks in advance
David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:45 GMT-3