From: Liviu Gheorghe (liviu.gheorghe@xxxxxxxxxxx)
Date: Fri Jul 26 2002 - 06:26:26 GMT-3
William,
Can you tell me where I can download an IOS for the 2500 series with MPLS
support?
I've checked on the CCO and it seems that the version you are referring to
isn't available.
Thanks,
Liviu
CCIE#6169
----- Original Message -----
From: "William Phang" <phangjk@hotpop.com>
To: "Todd Carswell" <acarswell@nc.rr.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, 24 July, 2002 5:09 AM
Subject: RE: OT - MPLS capabilities in IOS
> Todd,
>
> Actually, we can run MPLS in 2500 series router if we have the MPLS IOS
for
> the 2500. The IOS name for the MPLS in 2500 is c2500-p-l.mpls.bin, but
this
> IOS is just for the lab, not for the real network.
>
> HTH
>
> William
> CCIE#9332
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Todd Carswell
> Sent: Tuesday, July 23, 2002 8:32 PM
> To: Paul Jin
> Cc: ccielab groupstudy
> Subject: Re: OT - MPLS capabilities in IOS
>
>
> Thanks to all for the response to my post.
>
> I'm using 2500s in my test bed, and I've been told that MPLS will not
> run on anything less than a 2600. That just saved me a lot of
> frustration! We've got some 2600s in our lab, so I'll switch over to
those.
>
> Again, many thanks to those who took the time to help me out.
>
> Todd Carswell
>
>
>
> Paul Jin wrote:
>
> >What type of router are you using to run mpls?
> >
> >It is not supported on the lower/older routers.
> >
> >- Paul
> >
> >
> >-----Original Message-----
> >From: Todd Carswell [mailto:acarswell@nc.rr.com]
> >Sent: Monday, July 22, 2002 11:21 AM
> >To: ccielab@groupstudy.com
> >Subject: OT - MPLS capabilities in IOS
> >
> >All,
> >
> >I'm currently running IOS 12.1(5)T9, but it doesn't seem to have MPLS
> >capabilities. I get the "unrecognized command" output from the CLI when
> >I try to type in the basic "tag switching" commands.
> >
> >Here's my question: Does IOS 12.1.16 with the "Service Provider" feature
> >set allow full MPLS functionality?
> >
> >I've searched the cisco web site for the answer, but I haven't had any
> >luck yet.
> >
> >Before anyone sends any flames my way... I know that MPLS is not on the
> >R&S lab exam. That's why I designated this message as OT.
> >
> >Thx
> >
> >Todd Carswell
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:45 GMT-3