From: Carlos A. Silva (carlos@xxxxxxxxxxx)
Date: Thu Jul 25 2002 - 23:22:38 GMT-3
thanks everyone.
the 'old' reload did the trick.
:o)
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jake Nesbitt
> Sent: Thursday, July 25, 2002 4:05 PM
> To: ccielab@groupstudy.com
> Subject: RE: [isdn] number verification
>
>
> On R3, you have isdn caller 3858662. R5's number appears to be
> 8358662 from
> the debug trace. They do not match and that is why the call is being
> rejected.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Carlos A. Silva
> Sent: Thursday, July 25, 2002 8:15 PM
> To: Ccielab
> Subject: [isdn] number verification
>
>
> hi, all:
>
> anybody have a working config on this. as far as i can tell this should be
> very easy.
> for example:
> have r3 accept a call only when r5 dials in from 3858662
>
> here's the my configs:
>
> r5
> =================
>
> interface BRI0
> ip address 180.4.35.1 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 20
> dialer fast-idle 5
> dialer map ip 180.4.35.2 name R3 broadcast 8358661
> dialer load-threshold 25 outbound
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866201
> no peer neighbor-route
> ppp authentication chap callin
> ppp multilink
>
>
>
>
>
> r3
> ====================
>
> interface BRI0
> ip address 180.4.35.2 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer map ip 180.4.35.1 name R5 broadcast
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn caller 3858662 <-----------------if i remove this command i can ping
> across!!!!!!!
> no peer neighbor-route
> ppp authentication chap
> ppp multilink
>
>
> these are the messages i get when i try to ping from R5 to R3:
>
> 02:04:25: ISDN BR0: RX <- SETUP pd = 8 callref = 0x35
> 02:04:25: Bearer Capability i = 0x8890
> 02:04:25: Channel ID i = 0x8A
> 02:04:25: Signal i = 0x40 - Alerting on - pattern 0
> 02:04:25: ENDPOINT IDent i = 0x8181
> 02:04:25: Calling Party Number i = 'A', 0x81, '8358662'
> <---------------------
> 02:04:25: Called Party Number i = 0xC1, '8358661'
> 02:04:25: ISDN BR0: Incoming call id = 0x6E
> 02:04:25: ISDN BR0: received HOST_INCOMING_CALL call_id 0x6E
> 02:04:25: ISDN BR0: Incoming call rejected due to screening.
> 02:04:25: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x6E
> 02:04:25: ISDN BR0: Error: Unexpected Disconnect_Ack - call id 0x6E
> 02:04:25: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0xB5
> 02:04:25: Cause i = 0x8095 - Call rejected
>
>
> any ideas?
>
>
> Carlos A. Silva [tel]: 52.818.401.2191
> Micronet de Mixico http://mnet.com.mx
>
> "...sal del camino, toma la ruta..." - Cerati
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:44 GMT-3