From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Sun Jul 28 2002 - 15:59:49 GMT-3
Is it
isdn caller 3858662
or
isdn caller 8358662
--- "Carlos A. Silva" <carlos@mnet.com.mx> wrote:
> hi, all:
>
> anybody have a working config on this. as far as i
> can tell this should be
> very easy.
> for example:
> have r3 accept a call only when r5 dials in from
> 3858662
>
> here's the my configs:
>
> r5
> =================
>
> interface BRI0
> ip address 180.4.35.1 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 20
> dialer fast-idle 5
> dialer map ip 180.4.35.2 name R3 broadcast 8358661
> dialer load-threshold 25 outbound
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866201
> no peer neighbor-route
> ppp authentication chap callin
> ppp multilink
>
>
>
>
>
> r3
> ====================
>
> interface BRI0
> ip address 180.4.35.2 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer map ip 180.4.35.1 name R5 broadcast
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn caller 3858662 <-----------------if i remove
> this command i can ping
> across!!!!!!!
> no peer neighbor-route
> ppp authentication chap
> ppp multilink
>
>
> these are the messages i get when i try to ping from
> R5 to R3:
>
> 02:04:25: ISDN BR0: RX <- SETUP pd = 8 callref =
> 0x35
> 02:04:25: Bearer Capability i = 0x8890
> 02:04:25: Channel ID i = 0x8A
> 02:04:25: Signal i = 0x40 - Alerting on -
> pattern 0
> 02:04:25: ENDPOINT IDent i = 0x8181
> 02:04:25: Calling Party Number i = 'A',
> 0x81, '8358662'
> <---------------------
> 02:04:25: Called Party Number i = 0xC1,
> '8358661'
> 02:04:25: ISDN BR0: Incoming call id = 0x6E
> 02:04:25: ISDN BR0: received HOST_INCOMING_CALL
> call_id 0x6E
> 02:04:25: ISDN BR0: Incoming call rejected due to
> screening.
> 02:04:25: ISDN BR0: received HOST_DISCONNECT_ACK
> call_id 0x6E
> 02:04:25: ISDN BR0: Error: Unexpected Disconnect_Ack
> - call id 0x6E
> 02:04:25: ISDN BR0: TX -> RELEASE_COMP pd = 8
> callref = 0xB5
> 02:04:25: Cause i = 0x8095 - Call rejected
>
>
> any ideas?
>
>
> Carlos A. Silva [tel]:
> 52.818.401.2191
> Micronet de Mixico http://mnet.com.mx
>
> "...sal del camino, toma la ruta..." - Cerati
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:47 GMT-3