From: Carlos A. Silva (carlos@xxxxxxxxxxx)
Date: Thu Jul 25 2002 - 22:31:38 GMT-3
hi, all:
thanks for your responses. i have to admit that mistake is actually me
cheating.
:o)
the actual line read 'isdn caller xxxxxxx'. i was using the wildcard
character...
i just typed it in when preparing the email...
now, what all of you are saying is that, if i learn to type the numbers
correctly it'll work?
i'm sad to report, i tried it again and no, it does not work.
this is one of those things i'm ready to take on faith.
thanks.
btw. does anybody have debug results of working config?
> -----Original Message-----
> From: Brian Dennis [mailto:brian@5g.net]
> Sent: Thursday, July 25, 2002 4:00 PM
> To: 'Carlos A. Silva'; 'Ccielab'
> Subject: RE: [isdn] number verification
>
>
> Looks like you have the 8 and the 3 mixed up.
>
> isdn caller 3858662
> Calling Party Number i = 'A', 0x81, '8358662'
>
> 3858662
> 8358662
>
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Carlos A. Silva
> Sent: Thursday, July 25, 2002 5:15 PM
> To: Ccielab
> Subject: [isdn] number verification
>
> hi, all:
>
> anybody have a working config on this. as far as i can tell this should
> be
> very easy.
> for example:
> have r3 accept a call only when r5 dials in from 3858662
>
> here's the my configs:
>
> r5
> =================
>
> interface BRI0
> ip address 180.4.35.1 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 20
> dialer fast-idle 5
> dialer map ip 180.4.35.2 name R3 broadcast 8358661
> dialer load-threshold 25 outbound
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866201
> no peer neighbor-route
> ppp authentication chap callin
> ppp multilink
>
>
>
>
>
> r3
> ====================
>
> interface BRI0
> ip address 180.4.35.2 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer map ip 180.4.35.1 name R5 broadcast
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn caller 3858662 <-----------------if i remove this command i can
> ping
> across!!!!!!!
> no peer neighbor-route
> ppp authentication chap
> ppp multilink
>
>
> these are the messages i get when i try to ping from R5 to R3:
>
> 02:04:25: ISDN BR0: RX <- SETUP pd = 8 callref = 0x35
> 02:04:25: Bearer Capability i = 0x8890
> 02:04:25: Channel ID i = 0x8A
> 02:04:25: Signal i = 0x40 - Alerting on - pattern 0
> 02:04:25: ENDPOINT IDent i = 0x8181
> 02:04:25: Calling Party Number i = 'A', 0x81, '8358662'
> <---------------------
> 02:04:25: Called Party Number i = 0xC1, '8358661'
> 02:04:25: ISDN BR0: Incoming call id = 0x6E
> 02:04:25: ISDN BR0: received HOST_INCOMING_CALL call_id 0x6E
> 02:04:25: ISDN BR0: Incoming call rejected due to screening.
> 02:04:25: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x6E
> 02:04:25: ISDN BR0: Error: Unexpected Disconnect_Ack - call id 0x6E
> 02:04:25: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0xB5
> 02:04:25: Cause i = 0x8095 - Call rejected
>
>
> any ideas?
>
>
> Carlos A. Silva [tel]: 52.818.401.2191
> Micronet de Mixico http://mnet.com.mx
>
> "...sal del camino, toma la ruta..." - Cerati
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:44 GMT-3