From: stephen.paynter@xxxxxx
Date: Thu Jul 25 2002 - 05:36:17 GMT-3
u could alter the dead interval in the area u are watching
-----Original Message-----
From: P729 [mailto:p729@cox.net]
Sent: 25 July 2002 06:14
To: llzhzhpp; ccielab@groupstudy.com
Subject: Re: How to delay Dialer watch?
Hi,
I don't believe you can. You can delay how long the backup path "lingers,"
but not the other way around. You could delay the SPF calculation after the
topology change using 'timers spf,' but of course it will affect all SPF
calculations.
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "llzhzhpp" <llzhzhpp@sina.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, July 24, 2002 4:00 AM
Subject: How to delay Dialer watch?
> hello, everyone,
> I have a dialer watch question.
> I setup a dialer watch to watch a route 10.2.3.0/24.
> Routing protocol is OSPF.
> every thing is ok. After 10.2.3.0 disappear, dialer watch up at once.
> But I want to dialer watch to delay 30 seconds to come up after loosing
10.2.3.0 , not at once.
> How can I do it?
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:43 GMT-3