From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Wed Jul 24 2002 - 01:55:33 GMT-3
At 12:13 PM 7/24/2002 +0800, Ivan wrote:
>I've configured the AUX port to simulate DDR between R1 and R2.
>the DDR work fine between R1 and R2.
>But when I start to ping the aux interface (dialer1) on R2 from
>another router R3 (connected to R1), i cannot reach it.
>Assuming all routing is in order
>It gives me this error message on R1
>:PPP-3-AUXFAST: Fast-switching to aux port, packet dropped
As a general rule, use "no ip route-cache" on BRI and AUX ports.
hsb
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3