From: kasturi cisco (kasturi_cisco@xxxxxxxxxxx)
Date: Wed Jul 24 2002 - 00:03:46 GMT-3
Tony,
When i look at ur configs, i dont see the 'snapshot server' and 'snapshot
client'. I am assuming its there on the client (calling router) and Server
(called router). what IOS versions are u using ?
In fact i tried this and also post this Q 2-3 days back and no one
responded..i am also using RIP but v2 and have problems with snapshot
routing...same symtopms (ping does not work and no routing tables).
See my configs below.If anyone can help me out ??? No one replied.
--------------------------------------
Group,
Snapshot routing does not seem to work with RIPV2. i am trying this
scenario.I a not getting any RIP routes on the router R11.
R5-------isdn----------------R11 (snapshot client)
153.1.111.133 .134
Both R5 and R11 run RIP v2 .what am i missing or is it a bug. The IOs
version is 12.1(5)T.
[R11]
interface BRI0
ip address 153.1.111.134 255.255.255.252
encapsulation ppp
dialer idle-timeout 300
dialer map snapshot 1 name R5 broadcast 8358662
dialer map ip 153.1.111.133 name R5 broadcast 8358662
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866101
isdn spid2 0835866301
snapshot client 5 30 dialer
ppp authentication chap
!
router rip
version 2
network 153.1.0.0
R11#i
153.1.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 153.1.111.133/32 is directly connected, BRI0
C 153.1.111.132/30 is directly connected, BRI0
R11#
--------------------
[R5]
interface BRI0
ip address 153.1.111.133 255.255.255.252
encapsulation ppp
dialer idle-timeout 300
dialer map ip 153.1.111.134 name R11 broadcast
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866201
isdn spid2 0835866401
snapshot server 5 dialer
ppp authentication chap
!
router rip
version 2
passive-interface Loopback0
passive-interface Loopback1
network 153.1.0.0
network 186.1.0.0
R5#i
153.1.0.0/16 is variably subnetted, 9 subnets, 4 masks
R 153.1.155.32/30 [120/1] via 153.1.200.2, 00:00:08, Serial0
C 153.1.200.0/24 is directly connected, Serial0
C 153.1.111.134/32 is directly connected, BRI0
C 153.1.111.132/30 is directly connected, BRI0
R 153.1.12.0/24 [120/1] via 153.1.200.2, 00:00:08, Serial0
C 153.1.1.0/24 is directly connected, Loopback1
C 153.1.61.0/28 is directly connected, Serial1
R 153.1.88.0/24 [120/1] via 153.1.200.2, 00:00:09, Serial0
R 153.1.66.0/24 [120/1] via 153.1.61.6, 00:00:19, Serial1
186.1.0.0/24 is subnetted, 1 subnets
C 186.1.1.0 is directly connected, Loopback0
This is driving me crazy. Thanks in advance.
kasturi.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3