From: beda jain (bpjain@xxxxxxxxx)
Date: Tue Jul 23 2002 - 18:42:14 GMT-3
Hi,
try with dialer string and dialer remote-name in dialer profile in place of
dialer map.
Thanks,
Beda
At 04:05 PM 7/23/2002 -0500, Tony Russell wrote:
>I have been working on my ISDN skills and have successfully gotten ospf
>demand circuit and dialer-watch working using the BRI interfaces. When
>working on a snapshot routing config, I found sample configs that used
>Dialer interfaces... I did not think it would be a big issue to use Dialers
>instead of the BRI so I started configuring.... I can successfully get the
>ISDN link up and the two routers see each other (sh isdn active) but I cant
>get any traffic across (pings, routing updates).... can anyone find
>anything wrong with these configs...
>
>hostname r5
>!
>!
>username r6 password 0 cisco
>!
>!
>ip subnet-zero
>!
>!
>no ip domain-lookup
>!
>ip audit notify log
>ip audit po max-events 100
>isdn switch-type basic-ni
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>interface Loopback0
> ip address 5.0.0.1 255.0.0.0
>!
>interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
>!
>interface Serial0/0
> no ip address
> shutdown
> no fair-queue
>!
>interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
>!
>interface Serial0/1
> ip address 10.0.0.5 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 10.0.0.6 506 broadcast
>!
>interface BRI1/0
> no ip address
> encapsulation ppp
> dialer rotary-group 1
> isdn switch-type basic-ni
> isdn spid1 40597249210101
> isdn spid2 40597249680101
> no fair-queue
> no cdp enable
> ppp authentication chap
> ppp multilink
>!
>interface BRI1/1
> no ip address
> shutdown
>!
>interface BRI1/2
> no ip address
> shutdown
>!
>interface BRI1/3
> no ip address
> shutdown
>!
>interface Dialer1
> ip address 192.168.0.5 255.255.255.0
> encapsulation ppp
> dialer in-band
> dialer map ip 192.168.0.6 name r6 broadcast 9724816
> dialer-group 1
> no fair-queue
> no cdp enable
> ppp authentication chap
> ppp chap password 7 02050D480809
> ppp multilink
>!
>router rip
> network 5.0.0.0
> network 192.168.0.0
>!
>ip classless
>ip http server
>ip pim bidir-enable
>!
>dialer-list 1 protocol ip permit
>!
>call rsvp-sync
>!
>!
>mgcp profile default
>!
>dial-peer cor custom
>!
>!
>!
>!
>line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
>line aux 0
>line vty 0 4
>!
>no scheduler allocate
>!
>end
>
>
>
>
>
>version 12.2
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname r6
>!
>!
>username r5 password 0 cisco
>!
>!
>ip subnet-zero
>!
>!
>no ip domain-lookup
>!
>ip audit notify log
>ip audit po max-events 100
>isdn switch-type basic-ni
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>interface Loopback0
> ip address 6.0.0.1 255.0.0.0
>!
>interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
>!
>interface Serial0/0
> no ip address
> shutdown
>!
>interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
>!
>interface Serial0/1
> ip address 10.0.0.6 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 10.0.0.5 605 broadcast
>!
>interface BRI1/0
> no ip address
> encapsulation ppp
> isdn switch-type basic-ni
> isdn spid1 40597248160101
> isdn spid2 40597249200101
> no cdp enable
> ppp authentication chap
> ppp multilink
>!
>interface BRI1/1
> no ip address
> shutdown
>!
>interface BRI1/2
> no ip address
> shutdown
>!
>interface BRI1/3
> no ip address
> shutdown
>!
>interface Dialer1
> ip address 192.168.0.6 255.255.255.0
> encapsulation ppp
> dialer in-band
> dialer map ip 192.168.0.5 name r5 broadcast
> dialer-group 1
> no fair-queue
> no cdp enable
> ppp authentication chap
> ppp chap password 7 0822455D0A16
> ppp multilink
>!
>router rip
> network 6.0.0.0
> network 192.168.0.0
>!
>ip classless
>ip http server
>ip pim bidir-enable
>!
>!
>call rsvp-sync
>!
>!
>mgcp profile default
>!
>dial-peer cor custom
>!
>!
>!
>!
>line con 0
> privilege level 15
> logging synchronous
>line aux 0
>line vty 0 4
>!
>no scheduler allocate
>!
>end
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3