From: TK-Network Çözümleri (umit.askan@xxxxxxxxxxxxx)
Date: Tue Jul 23 2002 - 18:10:55 GMT-3
at the dce side :
frame-relay switching
int s0
frame-relay intf-type dce
and your dlci mappings must match, use 101 or 102 at both sides.
hope this helps
umit
-----Original Message-----
From: Armand D [mailto:ciscoworks2001@yahoo.com]
Sent: Tuesday, July 23, 2002 23:01
To: ccielab@groupstudy.com
Subject: Frame Relay NO Sub-interfaces
Hello,
I'm wondering if anyone has a sample config for a
Frame Relay back to back using no subinterfaces. I
have the following configurations on my routers. Both
routers show interface status UP DOWN and PVC status
inactive.
DTE Side:
Interface s0
encap frame-relay
ip add 10.0.0.1 255.255.255.0
frame-Relay map ip 10.0.0.2 101 broadcast
frame-relay lmi-type cisco
DCE Side:
Ineterface s0
encap frame-relay
ip add 10.0.0.2 255.255.255.0
Frame-Relay map ip 10.0.0.1 102 broadcast
clock rate 128000
frame-relay lmi-type cisco
Any tips would be great.
Thanks,
Armand
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3