From: yakout esmat (yesmat@xxxxxxxxxxxxxx)
Date: Tue Jul 23 2002 - 08:00:37 GMT-3
The only way is to remove ipx routing and wr mem, make sure that you have
remove ipx routing before you reload the router.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Graham, John
Sent: Tuesday, July 23, 2002 8:16 PM
To: 'steven owen'; ccielab
Subject: RE: how to change ipx node number
I had the same prolem and ended up doing a wr erase and reload.
It did cure it, but I would interested to learn of a more efficient method.
-----Original Message-----
From: steven owen [mailto:trueccie@yahoo.com]
Sent: 23 July 2002 09:58
To: ccielab
Subject: how to change ipx node number
when i config "ipx routing 2.2.2",i just key in "ipx
routing",so the Cisco IOS software uses the hardware
MAC address currently assigned to it as its node
address.
My question is how to change its node number.I tried
to delete ipx routing first ,then "ipx routing
2.2.2",but the node number couldn't be changed.
So i reload router ,i configed the new node number.
is there any way except reloading router?
Thanks
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:40 GMT-3