From: Matt Mullins (dahlene@xxxxxxxx)
Date: Sat Jul 20 2002 - 23:00:30 GMT-3
I use one of the old AGS+ routers in my lab as a frame switch. I have 6 DCE
cables I connect to it. You have to pull the back off the case off and move
a jumper or dip switch to make it a DCE port. Here is a link that talks
about it.
http://www.cisco.com/univercd/cc/td/doc/product/core/cisagspl/agshim/69677.h
tm#xtocid492114
----- Original Message -----
From: <Ccieyet2b@aol.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, July 20, 2002 3:26 PM
Subject: need help with old AGS+
> Hi,
>
> I'm trying to configure an AGS+ as a frame relay switch without much
success.
> It's running version 9.1 and I can't figure out how to change the serial
> interfaces from DTE to DCE. Putting in the clockrate command doesn't
work.
> I get a message that "setting clockrate on a DTE" isn't allowed. And, the
> documentation for version 9.1 doesn't say anything about about this or
> configuring this router as a frame relay switch.
>
> Can anyone help me out?
>
> Thanks in advanced.
>
> Jim
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:38 GMT-3