From: kris.keen@xxxxxxxxxx
Date: Thu Jul 18 2002 - 21:33:20 GMT-3
I've upgraded to 12.1(5)10T
I am still getting the error message on both units..\
Serial # 8704868
Version # 5.1
avm system bus fpga init pass:
:FPGA program OK.
avm fpga programming successful
:avm qslac fpga init pass:
:
00:00:31: 1/1 circuit type voice
00:00:31: 1/3 circuit type voice
00:00:31: %Voice system not initialized.RS366: VDM is not found
RS366: killing the process pid = 20.
00:00:47: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:47: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:47: %LINK-3-UPDOWN: Interface Serial0, changed state to down
00:00:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to up
00:00:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
state to down
00:00:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed
state to down
00:00:48: %LINK-3-UPDOWN: Interface FXS 1/1, changed state to
Administrative Shutdown
00:00:48: %LINK-3-UPDOWN: Interface E&M 1/3, changed state to
Administrative Shutdown
00:00:48: %SYS-5-CONFIG_I: Configured from memory by console
00:00:50: %LINK-5-CHANGED: Interface Serial0, changed state to
administratively down
00:00:50: %LINK-5-CHANGED: Interface Serial1, changed state to
administratively down
00:00:50: %LINK-5-CHANGED: Interface FR-ATM20, changed state to
administratively down
00:00:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface FR-ATM20, changed
state to down
00:00:52: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) MC3810 Software (MC3810-A2JSV556I-M), Version 12.1(5)T10, RELEASE
SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 07-Aug-01 23:02 by ccaiInterface Ethernet0 assigned DHCP
address 192.168.1.23, mask 255.255.255.0
Translating "r6"...domain server (255.255.255.255) (192.168.1.1)
flashfs[9]: 1 files, 1 directories
flashfs[9]: 0 orphaned files, 0 orphaned directories
flashfs[9]: Total bytes: 16320000
flashfs[9]: Bytes used: 9513984
flashfs[9]: Bytes available: 6806016
flashfs[9]: flashfs fsck took 36 seconds.
flashfs[9]: Initialization complete.
r6>
-----------------------------------------------------------------
Kris Keen - CCNP, CCDP, CNE
Network Support Specialist - Network Systems
Aon Risk Services Australia Limited
(612) 9253 7272
0404862970
E: Kris.Keen@aon.com.au
"Javed Tufail"
<jtufail@cisco To: <kris.keen@aon.com.au>, <louis
.krucker@sunrise.net>,
.com> <franjime@cisco.com>
cc: <ccielab@groupstudy.com>
19/07/2002 bcc:
10:05 AM Subject: RE: Anyone seen this?
You are running an old code that showed this problem, I dont recall the
exact bug id but 12.0.9 for mc3810 has been deferred. Try changing the
code.
The next up from 12.0.9 was mc3810-a2binr3v2-mz.120-10.bin
Javed
-----Original Message-----
From: kris.keen@aon.com.au [mailto:kris.keen@aon.com.au]
Sent: Thursday, July 18, 2002 4:16 PM
To: louis.krucker@sunrise.net; jtufail@cisco.com; franjime@cisco.com
Cc: ccielab@groupstudy.com
Subject: RE: Anyone seen this?
00:00:02: %Voice system not initialized.
Type of VoicePort is E&MError: could not set value, code = -4
Type of VoicePort is FXSError: could not set value, code = -4
r5>
r5>sh ver
Cisco Internetwork Operating System Software
IOS (tm) MC3810 Software (MC3810-BINR3V2-M), Version 12.0(9), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 01:27 by bettyl
Image text-base: 0x00023000, data-base: 0x006E9C58
ROM: System Bootstrap, Version 12.0(6r)T4, RELEASE SOFTWARE (fc1)
ROM: MC3810 Software (MC3810-WBOOT-M), Version 11.3(1)MA1, MAINTENANCE
INTERIM SOFTWARE
r5 uptime is 1 minute
System restarted by reload
System image file is "flash:mc3810-binr3v2-mz.120-9.bin"
Cisco MC3810 (MPC860) processor (revision 06.07) with 54784K/10752K bytes
of memory.
Processor board ID 09513084
PPC860 PowerQUICC, partnum 0x0000, version A03(0x0013)
Channelized E1, Version 1.0.
Bridging software.
MC3810 SCB board (v05.A0)
1 Multiflex T1(slot 3) RJ45 interface(v02.C0)
1 Six-Slot Analog Voice Module (v03.K0)
1 Analog E&M voice interface (v03.K0) port 1/1
1 Analog FXS voice interface (v03.K0) port 1/3
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 Channelized E1/PRI port(s)
1 Channelized T1/PRI port(s)
256K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (AMD29F016)
Configuration register is 0x2102
r5>
Any ideas guys?
I've got two units with the same issue :(
Cheers
-----------------------------------------------------------------
Kris Keen - CCNP, CCDP, CNE
Network Support Specialist - Network Systems
Aon Risk Services Australia Limited
(612) 9253 7272
0404862970
E: Kris.Keen@aon.com.au
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:36 GMT-3