From: Javed Tufail (jtufail@xxxxxxxxx)
Date: Thu Jul 18 2002 - 21:05:03 GMT-3
You are running an old code that showed this problem, I dont recall the
exact bug id but 12.0.9 for mc3810 has been deferred. Try changing the code.
The next up from 12.0.9 was mc3810-a2binr3v2-mz.120-10.bin
Javed
-----Original Message-----
From: kris.keen@aon.com.au [mailto:kris.keen@aon.com.au]
Sent: Thursday, July 18, 2002 4:16 PM
To: louis.krucker@sunrise.net; jtufail@cisco.com; franjime@cisco.com
Cc: ccielab@groupstudy.com
Subject: RE: Anyone seen this?
00:00:02: %Voice system not initialized.
Type of VoicePort is E&MError: could not set value, code = -4
Type of VoicePort is FXSError: could not set value, code = -4
r5>
r5>sh ver
Cisco Internetwork Operating System Software
IOS (tm) MC3810 Software (MC3810-BINR3V2-M), Version 12.0(9), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 01:27 by bettyl
Image text-base: 0x00023000, data-base: 0x006E9C58
ROM: System Bootstrap, Version 12.0(6r)T4, RELEASE SOFTWARE (fc1)
ROM: MC3810 Software (MC3810-WBOOT-M), Version 11.3(1)MA1, MAINTENANCE
INTERIM SOFTWARE
r5 uptime is 1 minute
System restarted by reload
System image file is "flash:mc3810-binr3v2-mz.120-9.bin"
Cisco MC3810 (MPC860) processor (revision 06.07) with 54784K/10752K bytes
of memory.
Processor board ID 09513084
PPC860 PowerQUICC, partnum 0x0000, version A03(0x0013)
Channelized E1, Version 1.0.
Bridging software.
MC3810 SCB board (v05.A0)
1 Multiflex T1(slot 3) RJ45 interface(v02.C0)
1 Six-Slot Analog Voice Module (v03.K0)
1 Analog E&M voice interface (v03.K0) port 1/1
1 Analog FXS voice interface (v03.K0) port 1/3
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 Channelized E1/PRI port(s)
1 Channelized T1/PRI port(s)
256K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (AMD29F016)
Configuration register is 0x2102
r5>
Any ideas guys?
I've got two units with the same issue :(
Cheers
-----------------------------------------------------------------
Kris Keen - CCNP, CCDP, CNE
Network Support Specialist - Network Systems
Aon Risk Services Australia Limited
(612) 9253 7272
0404862970
E: Kris.Keen@aon.com.au
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:36 GMT-3