Re: ospf routes in database not in route table

From: beda jain (bpjain@xxxxxxxxx)
Date: Tue Jul 16 2002 - 12:33:06 GMT-3

• Next message: Volkov, Dmitry (Toronto - BCE): "RE: Default route over ISDN"
• Previous message: Jim Brown: "RE: price of ip's"
• Maybe in reply to: Ademola Osindero: "ospf routes in database not in route table"
• Next in thread: Brian McGahan: "RE: ospf routes in database not in route table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
there may two issue.

1. Forwarding address for external route
2. network mismatch in your frame relay link

Thanks,
Beda
At 12:06 AM 7/16/2002 +0100, Ademola Osindero wrote:
>Hi group,
>
>Can there be any reason why a route existing in an OSPF database will not
>be installed in the route table?
>
>While practicing Cyscoexeprt lab, I mad routers r2, r5 and r6 to have ip
>ospf net non-broadcast and also configured there neighbors' addresses. This
>was all in the quest to modify the dead interval to 120seconds. But
>apparently no ospf route was installed on r2 except for routes emanating
>from r1. Could there be any reason for this?
>
>Regards,
>
>Osindero Ademola
>Schlumberger Network Solutions
>Tel: 234 1 261 0446 Ext 5427
>Fax 234 1 262 1034
>email:osindero@lagos.sns.slb.com

• Next message: Volkov, Dmitry (Toronto - BCE): "RE: Default route over ISDN"
• Previous message: Jim Brown: "RE: price of ip's"
• Maybe in reply to: Ademola Osindero: "ospf routes in database not in route table"
• Next in thread: Brian McGahan: "RE: ospf routes in database not in route table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:32 GMT-3