From: Fanglo MA (fangloma@xxxxxxxxxxxxxx)
Date: Tue Jul 16 2002 - 06:33:07 GMT-3
You should issue passive command on the interface also.
HTH
Fanglo
On Tue, 16 Jul 2002, Luis Miguel Gil wrote:
> hi all,
> I am triying to establish a neighbor relationship between three RIP
> speakers but avoiding the RIP broadcast. I thought that with the neighbor
> command only the speakers would exchange RIP updates, but debugging IP RIP
> you can see that the routers are sending updates to 255.255.255.255 AND to
> the defined neighbors.
> is this a bug or have I missed something ?
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Erhan Kurt
> Sent: Tuesday, July 16, 2002 1:01 PM
> To: zlf; Przemyslaw Karwasiecki
> Cc: ccielab@groupstudy.com
> Subject: RE: ospf and rip redistribution
>
>
> With OSPF area 0, do not try area range. Use Summary address in your ASBR.
> -if you do not have an ASBR in area 0, make a router ASBR via using
> redistribute connected with a strict route-map-
>
>
> Never Give Up,
> Erhan
>
>
> -----Original Message-----
> From: zlf [mailto:pstn100@sina.com]
> Sent: 16 Temmuz 2002 Sal} 11:47
> To: Przemyslaw Karwasiecki
> Cc: ccielab@groupstudy.com
> Subject: ospf and rip redistribution
>
>
> The OSPF domain has a longer mask than the RIP domain, and they're on the
> same major network. we know RIP won't redistribute the route into RIP
> domain. if we cannot use static route,how we can resovle it. some book say
> ospf "area range" or "summary" can resovle this problem, but i have done
> some test, sometime it's ok,but sometime it won't. i think "area range" or
> "summary" is only function in ospf area and only aggregate ospf lsa, not
> produce route.so if in a single ospf area and i want redistribute the ospf
> network into rip domain,how i can do. my english is poor,i don't know if i
> say it clearly.
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:32 GMT-3