From: Colin Barber (Colin.Barber@xxxxxxxxxxxxxx)
Date: Tue Jul 16 2002 - 10:07:41 GMT-3
passive-interface is needed to stop the broadcasts
-----Original Message-----
From: Luis Miguel Gil [mailto:lmgil@intecno.net]
Sent: 16 July 2002 13:22
To: ccielab@groupstudy.com
Subject: RIP with neigbor command
hi all,
I am triying to establish a neighbor relationship between three RIP
speakers but avoiding the RIP broadcast. I thought that with the neighbor
command only the speakers would exchange RIP updates, but debugging IP RIP
you can see that the routers are sending updates to 255.255.255.255 AND to
the defined neighbors.
is this a bug or have I missed something ?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Erhan Kurt
Sent: Tuesday, July 16, 2002 1:01 PM
To: zlf; Przemyslaw Karwasiecki
Cc: ccielab@groupstudy.com
Subject: RE: ospf and rip redistribution
With OSPF area 0, do not try area range. Use Summary address in your ASBR.
-if you do not have an ASBR in area 0, make a router ASBR via using
redistribute connected with a strict route-map-
Never Give Up,
Erhan
-----Original Message-----
From: zlf [mailto:pstn100@sina.com]
Sent: 16 Temmuz 2002 Sal} 11:47
To: Przemyslaw Karwasiecki
Cc: ccielab@groupstudy.com
Subject: ospf and rip redistribution
The OSPF domain has a longer mask than the RIP domain, and they're on the
same major network. we know RIP won't redistribute the route into RIP
domain. if we cannot use static route,how we can resovle it. some book say
ospf "area range" or "summary" can resovle this problem, but i have done
some test, sometime it's ok,but sometime it won't. i think "area range" or
"summary" is only function in ospf area and only aggregate ospf lsa, not
produce route.so if in a single ospf area and i want redistribute the ospf
network into rip domain,how i can do. my english is poor,i don't know if i
say it clearly.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:32 GMT-3