RE: ospf routes in database not in route table

From: Brian Dennis (brian@xxxxxx)
Date: Mon Jul 15 2002 - 20:39:10 GMT-3

• Next message: Ahmed Mamoor Amimi: "Re: FRTS want to nail it down !!"
• Previous message: fingham@xxxxxxx: "Re: Re: SNA's access-list"
• Maybe in reply to: Ademola Osindero: "ospf routes in database not in route table"
• Next in thread: Joe Higgins: "Re: ospf routes in database not in route table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
http://www.cisco.com/warp/public/104/26.html

Brian Dennis, CCIE #2210 (R&S/ISP Dial)

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ademola Osindero
Sent: Monday, July 15, 2002 4:07 PM
To: ccielab@groupstudy.com
Subject: ospf routes in database not in route table

Hi group,

Can there be any reason why a route existing in an OSPF database will
not
be installed in the route table?

While practicing Cyscoexeprt lab, I mad routers r2, r5 and r6 to have ip

ospf net non-broadcast and also configured there neighbors' addresses.
This
was all in the quest to modify the dead interval to 120seconds. But
apparently no ospf route was installed on r2 except for routes emanating

from r1. Could there be any reason for this?

Regards,

Osindero Ademola
Schlumberger Network Solutions
Tel: 234 1 261 0446 Ext 5427
Fax 234 1 262 1034
email:osindero@lagos.sns.slb.com

• Next message: Ahmed Mamoor Amimi: "Re: FRTS want to nail it down !!"
• Previous message: fingham@xxxxxxx: "Re: Re: SNA's access-list"
• Maybe in reply to: Ademola Osindero: "ospf routes in database not in route table"
• Next in thread: Joe Higgins: "Re: ospf routes in database not in route table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:31 GMT-3