From: John White (jan_white7@xxxxxxxxxxx)
Date: Fri Jul 12 2002 - 16:18:44 GMT-3
Actually router can make second call when the load exceeds threshold either
on transmit or recive leads.
Jan
>From: "Anthony Pace" <anthonypace@fastmail.fm>
>Reply-To: "Anthony Pace" <anthonypace@fastmail.fm>
>To: "John White" <jan_white7@hotmail.com>, steven.j.nelson@bt.com
>CC: ccielab@groupstudy.com
>Subject: RE: dialer laod-threshold
>Date: Fri, 12 Jul 2002 18:41:03 +0000
>
>What is the funtion of the out/in/either switch on the dialer load
>threshold? Isn't "outbound" the only way a router can bring up abnohter
>channel?
>
>Anthony PaAce
>
>
>
>On Fri, 12 Jul 2002 18:03:55 +0000, "John White"
><jan_white7@hotmail.com> said:
> > Thanks
> > You've got me interested in . How about on way dial?Would you put the
> > statement on both.?
> > Jan
> >
> >
> > >From: steven.j.nelson@bt.com
> > >To: jan_white7@hotmail.com
> > >Subject: RE: dialer laod-threshold
> > >Date: Fri, 12 Jul 2002 17:33:28 +0100
> > >
> > >Jan
> > >
> > >If it is two way dial then you need only the statements on the box that
> > >wants to bring the second channel up using the in or out keyword on the
> > >dialer load-threshold command.
> > >
> > >Thanks
> > >
> > >Steve
> > >-----Original Message-----
> > >From: John White [mailto:jan_white7@hotmail.com]
> > >Sent: 12 July 2002 16:54
> > >To: Nelson,SJ,Steven,IVNH33 C
> > >Cc: ccielalb@groupstudy.com
> > >Subject: RE: dialer laod-threshold
> > >
> > >
> > >
> > >Steve,
> > >This is 2 way dial .BTW do I need second dialer map statement on both
>ends
> > >of ISDN line.?
> > >Thanks
> > >Steve
> > >
> > > >From: steven.j.nelson@bt.com
> > > >To: jan_white7@hotmail.com
> > > >Subject: RE: dialer laod-threshold
> > > >Date: Fri, 12 Jul 2002 08:58:58 +0100
> > > >
> > > >Jan
> > > >
> > > >It depends on whether it is one way or two way dial, you will also
>need
> > >to
> > > >add ppp multilink...
> > > >
> > > >Thanks
> > > >
> > > >Steve
> > > >
> > > >-----Original Message-----
> > > >From: John White [mailto:jan_white7@hotmail.com]
> > > >Sent: 12 July 2002 07:17
> > > >To: ccielab@groupstudy.com
> > > >Subject: dialer laod-threshold
> > > >
> > > >
> > > >Hi Guys,
> > > >I'm asked to configure dialer interface such way, so second B-channel
> > > >should
> > > >
> > > >come up when load exceeds 30% .Should I configure command "dialer
> > > >load-threshold either " on both ends of ISDN link, or just one.?I
>think I
> > > >read something long time ago, that this command should only be use on
>one
> > > >end ,so there is no conflict between the routers , when they both try
>to
> > > >bring the link up.Can anybody confirm this?
> > > >Thanks
> > > >Jan
> > > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:27 GMT-3