From: John White (jan_white7@xxxxxxxxxxx)
Date: Fri Jul 12 2002 - 15:03:55 GMT-3
Thanks
You've got me interested in . How about on way dial?Would you put the
statement on both.?
Jan
>From: steven.j.nelson@bt.com
>To: jan_white7@hotmail.com
>Subject: RE: dialer laod-threshold
>Date: Fri, 12 Jul 2002 17:33:28 +0100
>
>Jan
>
>If it is two way dial then you need only the statements on the box that
>wants to bring the second channel up using the in or out keyword on the
>dialer load-threshold command.
>
>Thanks
>
>Steve
>-----Original Message-----
>From: John White [mailto:jan_white7@hotmail.com]
>Sent: 12 July 2002 16:54
>To: Nelson,SJ,Steven,IVNH33 C
>Cc: ccielalb@groupstudy.com
>Subject: RE: dialer laod-threshold
>
>
>
>Steve,
>This is 2 way dial .BTW do I need second dialer map statement on both ends
>of ISDN line.?
>Thanks
>Steve
>
> >From: steven.j.nelson@bt.com
> >To: jan_white7@hotmail.com
> >Subject: RE: dialer laod-threshold
> >Date: Fri, 12 Jul 2002 08:58:58 +0100
> >
> >Jan
> >
> >It depends on whether it is one way or two way dial, you will also need
>to
> >add ppp multilink...
> >
> >Thanks
> >
> >Steve
> >
> >-----Original Message-----
> >From: John White [mailto:jan_white7@hotmail.com]
> >Sent: 12 July 2002 07:17
> >To: ccielab@groupstudy.com
> >Subject: dialer laod-threshold
> >
> >
> >Hi Guys,
> >I'm asked to configure dialer interface such way, so second B-channel
> >should
> >
> >come up when load exceeds 30% .Should I configure command "dialer
> >load-threshold either " on both ends of ISDN link, or just one.?I think I
> >read something long time ago, that this command should only be use on one
> >end ,so there is no conflict between the routers , when they both try to
> >bring the link up.Can anybody confirm this?
> >Thanks
> >Jan
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:27 GMT-3