dlsw remote-peer tcp and dynamic option

From: lao ya li (hulaoya@xxxxxxxxxxxx)
Date: Wed Jul 10 2002 - 00:30:50 GMT-3

• Next message: Danny.Wang@xxxxxxxxxxxxxx: "RE: ISDN and OSPF"
• Previous message: Fanglo MA: "RE: IP EIGRP summary address problem with passive interface"
• Next in thread: Colin Barber: "RE: dlsw remote-peer tcp and dynamic option"
• Maybe reply: Colin Barber: "RE: dlsw remote-peer tcp and dynamic option"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
HI Friend,

r1:dlsw remote-peer 0 tcp ip-address of r2

r2:dlsw remote-peer 0 tcp ip-address of r1 dynamic

I think :

Above configuration is meaningless.Dynamic should be used at both routers.

it is wrong that one router uses the dynamic and the other side route does not
use the dynamic.

dlsw remote-peer 0 tcp ip-address of r2 should changed as dlsw remote-peer 0 t
cp ip-address of r2 dynamic

Any comment is welcome for this configuration!

rgds//lao ya

---------------------------------
Do You Yahoo!?
RxPP>^M7>[;aVPT- 4s@KLT!.=p!/K-=+P&0A?

• Next message: Danny.Wang@xxxxxxxxxxxxxx: "RE: ISDN and OSPF"
• Previous message: Fanglo MA: "RE: IP EIGRP summary address problem with passive interface"
• Next in thread: Colin Barber: "RE: dlsw remote-peer tcp and dynamic option"
• Maybe reply: Colin Barber: "RE: dlsw remote-peer tcp and dynamic option"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:26 GMT-3