From: Study (study@xxxxxxxxxxx)
Date: Wed Jul 10 2002 - 20:07:15 GMT-3
Some information you may find useful since I had the same problem
setting up my Merge:
- I bought a "Do-it-Yourself" RJ12 Female Adapter (6 pins) and the cable
is what I believe a patch phone cable. The cable has 6 pins on both ends
and it's a rollover cable. (White,Black,Red,Green,Yellow,Blue on one end
and Blue,Yellow,Green,Red,Black,White on the other end)
Pin assignment for RJ12 Adapter:
Pin 2:Black
Pin 3:Yellow
Pin 5:Red
Pin 7:Blue
Pin 6:Green
Yellow wire is not used.
- You need the PAW software. Contact the Sales at MergeTech and ask for
the software. Don't say you bought the item on Ebay but that you are
working for a prestigious company and you need to setup one simulator :)
They will provide you a password and a link.
Good luck,
Fabrice
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie candidate
Sent: Sunday, July 07, 2002 2:39 PM
To: ccie candidate; Robert Yee
Cc: ccielab@groupstudy.com
Subject: RE: OT : ISDN simulator Merge 2000A
i got the pin out of this cable from their site and i made the cable
manually ....still im not getting any reponse .
do i need to have special software for that or the hyper terminal is the
one ?
also do you know what is the cable im supposed to use between the isdn
S/T port and the router port? is it straight Rj45 cable or something
else ?
--On Sun, 7 Jul 2002 14:37:50 Robert Yee wrote: >You need a special cable in order to hook it up to your PC. You can get it from Merge (www.mergetech.com). I think it is about $17.00. They[re tech support is e-mail, but they are pretty helpful. > >Good luck. > >Robert > >-----Original Message----- >From: ccie candidate [mailto:ccie1@lycos.com] >Sent: Sunday, July 07, 2002 2:15 PM >To: ccielab@groupstudy.com >Subject: OT : ISDN simulator Merge 2000A > > > guys ; >i got used simulator Merge 2000 A from ebay ..the simulator has no keypad ..when i connect it to PC and use the hyper terminal i got no repsonse . >is there anything which i have to do to get this device work? >do i need to have the PAW software ..or what is the issue here. >if anyone has some experience with this device please post some hints . > > >Regards ; > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:25 GMT-3