From: Fabrice Bobes (study@xxxxxxxxxxx)
Date: Thu Jul 11 2002 - 00:57:11 GMT-3
I know for sure that the PAW software is working for a Merge 2000AF as
well. Unfortunately, I can't tell you if it's working for 2000A.
Checking the groupstudy archive, I found this aricle
http://www.groupstudy.com/archives/ccielab/200205/msg00515.html
This person was selling a 2000A and if you find a way to contact him, he
may help you.
Still MergeTech may be your best chance.
Not much help, I know
Fabrice
-----Original Message-----
From: ccie candidate [mailto:ccie1@lycos.com]
Sent: Wednesday, July 10, 2002 5:24 PM
To: Study
Subject: RE: OT : ISDN simulator Merge 2000A
hi ;
i have got the PAW software from some guy on the mailing list ( nice :)
however it didnt detect the device ..may be it is a problem of the cable
..i dont know ..but the PAW is for 2000AFP not 2000A
WILL IT WORK FOR BOTH ? IF YOU HAVE EXPERIENCE TELL ME .
however ..i noticed that the simulator gives me the dailer string ..i
managed to get the two routers works without touching the config of it
..i didnt provide any SPIDS ..however it worked fine and with the two B
channels .
do u have any thoughts ?
thanks
--On Wed, 10 Jul 2002 16:07:15 Study wrote: >Some information you may find useful since I had the same problem >setting up my Merge: > >- I bought a "Do-it-Yourself" RJ12 Female Adapter (6 pins) and the >cable is what I believe a patch phone cable. The cable has 6 pins on >both ends and it's a rollover cable. (White,Black,Red,Green,Yellow,Blue
>on one end and Blue,Yellow,Green,Red,Black,White on the other end) Pin >assignment for RJ12 Adapter: Pin 2:Black >Pin 3:Yellow >Pin 5:Red >Pin 7:Blue >Pin 6:Green >Yellow wire is not used. > >- You need the PAW software. Contact the Sales at MergeTech and ask for
>the software. Don't say you bought the item on Ebay but that you are >working for a prestigious company and you need to setup one simulator >:) They will provide you a password and a link. > >Good luck, > >Fabrice > > >-----Original Message----- >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>ccie candidate >Sent: Sunday, July 07, 2002 2:39 PM >To: ccie candidate; Robert Yee >Cc: ccielab@groupstudy.com >Subject: RE: OT : ISDN simulator Merge 2000A > > > i got the pin out of this cable from their site and i made the cable >manually ....still im not getting any reponse . > > >do i need to have special software for that or the hyper terminal is >the one ? also do you know what is the cable im supposed to use between
>the isdn S/T port and the router port? is it straight Rj45 cable or >something else ? > > >-- > >On Sun, 7 Jul 2002 14:37:50 > Robert Yee wrote: >>You need a special cable in order to hook it up to your PC. You can >>get >it from Merge (www.mergetech.com). I think it is about $17.00. They[re >tech support is e-mail, but they are pretty helpful. >> >>Good luck. >> >>Robert >> >>-----Original Message----- >>From: ccie candidate [mailto:ccie1@lycos.com] >>Sent: Sunday, July 07, 2002 2:15 PM >>To: ccielab@groupstudy.com >>Subject: OT : ISDN simulator Merge 2000A >> >> >> guys ; >>i got used simulator Merge 2000 A from ebay ..the simulator has no >keypad ..when i connect it to PC and use the hyper terminal i got no >repsonse . >>is there anything which i have to do to get this device work? do i >>need to have the PAW software ..or what is the issue here. if anyone >>has some experience with this device please post some hints . >> >> >>Regards ; >> >>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:26 GMT-3