From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Thu Jul 04 2002 - 16:06:23 GMT-3
its assumed that the encapsulation frame-relay is already
configured...without it, he wouldnt be able to have access to the frame map
command
At 03:18 PM 7/4/2002 +0000, Prakash H Somani wrote:
>Hi,
>
>Where is "encapsulation Frame-relay" command ?
>
>regards...Prakash
>
>On Tue, 02 Jul 2002 Jerry Haverkos wrote :
>>Everyone
>>
>>Are there any caveats to running IPX EIGRP Over Frame?
>>
>>R5 ---- frame ---- R1
>>
>>My 2 routers, on 12.1(13), aren't making an adjacency. IPX/RIP works fine.
>>The configs are shown below:
>>
>>R5
>>ipx routing 0005.0005.0005
>>int s0
>> ipx network 1155
>> ipx hello-interval eigrp 200 30
>> ipx hold-time eigrp 200 90
>> ipx hold-down eigrp 200 100
>> no ipx split-horizon eigrp 200
>> frame-relay map ipx 1155.0001.0001.0001 104 broadcast
>>ipx router eigrp 200
>> network 1155
>>ipx router rip
>> no network 1155
>>
>>R1
>>ipx routing 0001.0001.0001
>>int s1/0
>> ipx network 1155
>> no ipx route-cache
>> ipx hello-interval eigrp 200 30
>> ipx hold-time eigrp 200 90
>> ipx hold-down eigrp 200 100
>> no ipx split-horizon eigrp 200
>> frame-relay map ipx 1155.0005.0005.0005 401
>>ipx router eigrp 200
>> network 1122 ---- > an IPX EIGRP Tunnel that's working
>> network 1155
>> network 1166 ------- > a serial link that's working
>> network 6611 --- an ISDN link that's working
>>ipx router rip
>> no network 1122
>> no network 6611
>> no network 1166
>> no network 1155
>>
>>
>>A debug shows R1 sending some kind of packet to R5 every 5 seconds.
>>2501-1#debug ipx packet
>>IPX packet debugging is on
>>2501-1#
>>00:04:37: IPX: Se0:1155.0001.0001.0001->1155.0005.0005.0005 ln=456 tc=00
>>pt=00 d
>>s=85BE ss=85BE, rcvd
>>00:04:37: IPX: Se0:1155.0001.0001.0001->1155.0005.0005.0005 ln=456 tc=00
>>pt=00 d
>>s=85BE ss=85BE, local
>>2501-1#
>>00:04:42: IPX: Se0:1155.0001.0001.0001->1155.0005.0005.0005 ln=456 tc=00
>>pt=00 d
>>s=85BE ss=85BE, rcvd
>>00:04:42: IPX: Se0:1155.0001.0001.0001->1155.0005.0005.0005 ln=456 tc=00
>>pt=00 d
>>s=85BE ss=85BE, local
>>2501-1#
>>00:04:47: IPX: Se0:1155.0001.0001.0001->1155.0005.0005.0005 ln=456 tc=00
>>pt=00 d
>>s=85BE ss=85BE, rcvd
>>00:04:47: IPX: Se0:1155.0001.0001.0001->1155.0005.0005.0005 ln=456 tc=00
>>pt=00 d
>>s=85BE ss=85BE, local
>>
>>Jerry Haverkos
>>jhaverkos@columbus.rr.com
>>614-351-8617
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:19 GMT-3