From: Huy Luu (hluu@xxxxxxxxxxxx)
Date: Mon Jul 01 2002 - 10:20:34 GMT-3
I got it to work with l2tpv3 also. The trick is to exclude the tunnel key
statement in both uti raw or l2tpv3. Actually uti raw is l2tpv3 and they
can both work together to form a tunnel. You can configure l2tpv3 on one
end and uti raw on the other.
Najam Saquib
<Najam.Saquib@medi To: Huy Luu <hluu@veroxity.com
>
aways.net> cc:
Subject: Re: Pleae help: l2tpv
2
06/30/02 11:16 AM
Hi,
I did it with Framerelay and it works fine. it is not l2tp it is uti
which behave differently than l2tp.
najam
Huy Luu wrote:
> Does anyone have a working configuration of l2tp version 3 on 7200
routers
> on the endpoint. Here is the topology.
>
>
PC--7200A--------L2TP----------------Internet-------------L2tp--------7200B--PC
>
> I'm running 12.0(21)ST1 on the 7200.
>
> I cannot get this config to work.
>
> 7200A:
> interface Tunnel1
> ip address 11.11.11.2 255.255.255.0
> no ip directed-broadcast
> tunnel source 172.16.1.1
> tunnel destination 172.16.10.1
> tunnel key 35
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> no keepalive
> speed 100
> full-duplex
> uti-tunnel Tunnel1
>
> 7200B:
> interface Tunnel1
> ip address 11.11.11.1 255.255.255.0
> no ip directed-broadcast
> tunnel source 172.16.10.1
> tunnel destination 172.16.1.1
> tunnel key 35
>
>
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> no keepalive
> speed 100
> full-duplex
> uti-tunnel Tunnel1
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:16 GMT-3