From: Ouellette, Tim (tim.ouellette@xxxxxxx)
Date: Mon Jul 01 2002 - 04:29:03 GMT-3
Okay, I see your point as well. I guess what I meant is that it's "Class C"
like or that the associated mask would be what one would use had a regular
old class C network. Ahh heck, it's late and I don't really know what I
meant. Sounded good at the time though.
-----Original Message-----
From: Michael Snyder [mailto:msnyder@ldd.net]
Sent: Sunday, June 30, 2002 11:26 PM
To: 'Ouellette, Tim'
Cc: ccielab@groupstudy.com
Subject: RE: eigrp network statements
Well, I understand your point.
Small correction.
"172.16.10.0 0.0.0.255" is a class C statement"
There is no class C address's in the 172.16.10.0 range. This is example
of a /24 subnet of a 172.16.0.0 major network. The term 'Class C' only
can be used for classful networks, i.e. the major networks that are /24.
This matter was pointed out to me a while ago, by one of our senior
engineers. I had to think about it, but I agree with him. Class C is a
network term that can not be used in a VLSM subnetted network. Another
example would be that 192.0.0.0/8 is not a 'Class A' network' even if
you could supernet it that way.
No big deal, just a small point.
Michael
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ouellette, Tim
Sent: Sunday, June 30, 2002 8:23 PM
To: 'Ping Pong'
Cc: 'ccielab@groupstudy.com'
Subject: RE: eigrp network statements
The "network 172.16.0.0" is a class B statement and your "network
172.16.10.0 0.0.0.255" is a class C statement. Not sure I'm making my
point. I would think you'd use the latter of the two if you wanted to
be
more specific of what ports you wanted to put into the eigrp process.
Tim
-----Original Message-----
From: Ping Pong [mailto:booby_trap2001@yahoo.com]
Sent: Sunday, June 30, 2002 5:42 PM
To: ccielab@groupstudy.com
Subject: eigrp network statements
Hello..
Since 12.0, we can define eigrp network statements
classlessly.
For ex.
router eigrp 1000
network 172.16.10.0 0.0.0.255
what is the difference between the above and this?
router eigrp 1000
network 172.16.0.0
and which is the preferred method in the lab?.
thanks.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:16 GMT-3