From: Zhihao Hong (tree9990@xxxxxxxxxxxx)
Date: Mon Jul 01 2002 - 04:18:42 GMT-3
But it's said we need to set it to be SRT
if you want to do translationing bridge with
source-bridge 200 20 1 5 something.
Right?
Thanks
At 16:34 2002-7-1 +1000, you wrote:
SRB is needed when you do DLSW.
David Ham
From: "gary braver" <gbraver@attbi.com>
Reply-To: "gary braver" <gbraver@attbi.com>
To: "'P729'" <p729@cox.net>, "'gbraver'"
<gbraver@attbi.com>,
<ccielab@groupstudy.com>
Subject: RE: Router config with 3900
Date: Sun, 30 Jun 2002 21:05:20 -0400
Thanks,
Just couldn't belive it was so basic (no SRB on the
router required)
-----Original Message-----
From: P729 [mailto:p729@cox.net]
Sent: Sunday, June 30, 2002 8:47 PM
To: gbraver; ccielab@groupstudy.com
Subject: Re: Router config with 3900
They'll need to agree on the ring number and speed (or
leave the 3900 set to
auto) of any rings they share. Bridge numbers are
arbitrary unless you will
be running the bridges in parallel. Bridges joining
the same two rings must
have unique bridge numbers.
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "gbraver" <gbraver@attbi.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, June 30, 2002 4:53 PM
Subject: Router config with 3900
> Think I might be getting myself confused
> - Know how to configure the 3900 for SRB
> - Know how to configure a Cisco router for SRB.
>
> Question is how do you configure a router so that it
runs SRB and works
with
> the 3900 (ie the 3900 acts as a bridge)?
>
> Thanks
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:16 GMT-3