From: David Ham (ccieau@xxxxxxxxxxx)
Date: Mon Jul 01 2002 - 03:34:42 GMT-3
SRB is needed when you do DLSW.
David Ham
>From: "gary braver" <gbraver@attbi.com>
>Reply-To: "gary braver" <gbraver@attbi.com>
>To: "'P729'" <p729@cox.net>, "'gbraver'" <gbraver@attbi.com>,
><ccielab@groupstudy.com>
>Subject: RE: Router config with 3900
>Date: Sun, 30 Jun 2002 21:05:20 -0400
>
>Thanks,
>
>Just couldn't belive it was so basic (no SRB on the router required)
>
>-----Original Message-----
>From: P729 [mailto:p729@cox.net]
>Sent: Sunday, June 30, 2002 8:47 PM
>To: gbraver; ccielab@groupstudy.com
>Subject: Re: Router config with 3900
>
>
>They'll need to agree on the ring number and speed (or leave the 3900 set
>to
>auto) of any rings they share. Bridge numbers are arbitrary unless you will
>be running the bridges in parallel. Bridges joining the same two rings must
>have unique bridge numbers.
>
>Regards,
>
>Mas Kato
>https://ecardfile.com/id/mkato
>----- Original Message -----
>From: "gbraver" <gbraver@attbi.com>
>To: <ccielab@groupstudy.com>
>Sent: Sunday, June 30, 2002 4:53 PM
>Subject: Router config with 3900
>
>
> > Think I might be getting myself confused
> > - Know how to configure the 3900 for SRB
> > - Know how to configure a Cisco router for SRB.
> >
> > Question is how do you configure a router so that it runs SRB and works
>with
> > the 3900 (ie the 3900 acts as a bridge)?
> >
> > Thanks
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:16 GMT-3