From: Colin Barber (Colin.Barber@xxxxxxxxxxxxxx)
Date: Sat Jun 29 2002 - 17:56:25 GMT-3
I have been reading conflicting information regarding the backup load
command. The second parameter to specify when to bring down the backup
interface is either
load % of primary interface
load % of combined primary and backup interface
for example if you have a serial interface running at 256K. You want to
bring up a 128K BRI if the load reaches 128K and terminate the BRI when
traffic drops below 64K. Is the command
backup load 50 25 or backup load 50 17
Colin
------------------------------------------------------------------------------
Live Life in Broadband
www.telewest.co.uk
The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential and/or privileged material.
Statements and opinions expressed in this e-mail may not represent those of the
company. Any review, retransmission, dissemination or other use of, or taking
of any action in reliance upon, this information by persons or entities other t
han the intended recipient is prohibited. If you received this in error, please
contact the sender immediately and delete the material from any computer.
==============================================================================
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:44 GMT-3