From: Reggie Terrell (rterrell@xxxxxxxxxxxxxxxx)
Date: Fri Jun 28 2002 - 12:05:02 GMT-3
Irene,
Token Ring is the default. The bits need to be swapped for Ethernet.
Hope this helps....
GOLBERY Irhne wrote:
> Hi,
>
> Please, I need your feed back.
>
> Can you try to clarify this example or to indicate an URL where it is well
> explained ( When Canonical to non Canocical transformation is needed and
> the reverse)
>
> This is the scenario
>
> r1 and r2 are configured as dlsw peers.
> r1 has a host on e0 network.
> r2 has host-1 and host-2 on its to0 network.
> I want r1's host to communicate with only host-1 on r2.
>
> MAC addresses for the hosts are :
> r1 host = 0000-8616-3F04
> r2 host-1 = 0000-F669-5EE7
> r2 host-2 = 0000-F669-5F25
>
> r1:
> dlsw local-peer peer-id 10.1.1.1
> dlsw remote-peer peer-id 10.2.2.2
> dlsw bridge-group 1
> !
> access-list 700 permit 0000.6F96.7AE1 0000.0000.0000
>
> or
>
> access-list 700 permit 0000.F669.5ee7 0000.0000.0000
> !
> int e0
> bridge-group 1
> !
> bridge 1 protocol ieee
>
> And now if I want r2's hosts to communicate with r1 host ( canonical, non
> canonical ?)
>
> Thanks for your help
>
> Irene
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:43 GMT-3